Website Abacus Service Corporation
Abacus Service Corporation
Company : Abacus Service Corporation
Description:
Quality Assurance Inspector
As an Quality Control Inspector you will ensure that rupture disc and rupture disc accessories meet documented guidelines outlined by manufacturing procedures, drawings, national standards, customer specifications and other applicable requirements. This is primarily done through receiving inspection, in-process and final inspection, and the calibration of precision measuring devices.
As an Quality Control Inspector, you will be responsible for:
" Following written company procedures and applicable outside certification standards, ensure all fabricated and machined products, holders and accessories meet drawing, work order and customer requirements
" Perform receiving inspection of all purchased parts
" Ensure parts in CNC area are produced properly through first part and in-process inspection
" Final inspect all product prior to packaging and shipment to end users
" Route accepted parts and products to next processing stage
" Document non-conforming parts or products and route them to designated holding area
" Calibrate and maintain inventory of measuring equipment, including pressure, control and computer gauges
" Track and enter inspection data into computer
" Develop non-conformance charts and run weekly updates
" Perform other duties as assigned, based on workload and business need
To be successful in this role you will:
" High school diploma or GED, associate's degree in industrial technology or related field preferred
" Ability to read blueprints
" Intermediate math skills
" Intermediate reading skills
" Effective verbal and written communication skills
" Knowledge of applicable certification standards and codes
" Working knowledge of computers sufficient to successfully use company ERP system, Microsoft Windows and Office
" 1st shift: 7am 3pm OT available and weekends
Enable Skills-Based Hiring
No
Business case justification
Increase in Workload
Special Equipment Required
N/A
Travel Abroad
No
Rig Certificate
No
On-Call
No
Does the Candidate require Offshore Medical & Training Certificates to be arranged by the Supplier?
No
Does the position allow for the worker to be virtual/remote?
No
Is Medical Check Required for Role?
No
Shift Work
No
Where is the role based?
Workshop Based
Shift Detail
(No Value)
Rotation schedule
NA
Other Rotation
(No Value)
Driving Licence
No
Driving on behalf of Company
No
Is MVR required
No
Candidate Type Consideration
National
Hours per Day
8
Hours per Week
40
Total Hours
2,088.00
Attachment:
Marketing Title
USA_Manufacturing Specialist 1_Production QC
Number of Headcount Required
1
Job Grade
10
Reason for Position
Increase in Workload
If Replacement, Name of Replacement
N/A
Confirm Cost Centre and Plant Code
TBC
Position Specific Information
Responsibilities / Tasks of the Role
" Following written company procedures and applicable outside certification standards, ensure all fabricated and machined products, holders and accessories meet drawing, work order and customer requirements
" Perform receiving inspection of all purchased parts
" Ensure parts in CNC area are produced properly through first part and in-process inspection
" Final inspect all product prior to packaging and shipment to end users
" Route accepted parts and products to next processing stage
" Document non-conforming parts or products and route them to designated holding area
" Calibrate and maintain inventory of measuring equipment, including pressure, control and computer gauges
" Track and enter inspection data into computer
" Develop non-conformance charts and run weekly updates
" Perform other duties as assigned, based on workload and business need
Expected Role Challenges
" Good physical condition
" Be able to work long standing hours
" Ability to sit for extended periods of time, up to 8 hours per day, though possibly more
" Frequently required to stand and/or walk, up to 2 hours per day, and make occasional trips from the office area to the manufacturing area
" Ability to lift up to 50 pounds, as needed
" Ability to wear all required personal protective equipment when in the manufacturing area, including, but not limited to, safety glasses and safety shoes
" Vision Requirements: Acuity of 20/30 or better in either eye; Read the Jaeger No. 2 Eye Chart at 16 inches
Is the Position Onshore / Offshore
Onshore
Working Conditions – describe the physical environment / conditions the worker will be working in
Workshop
Are there any safety risks associated with the role?
workshop related
Will the worker be working at a customer's facility?
N/A
Will the worker be driving a Company vehicle or receive a vehicle allowance?
N/A
Is the worker required to travel for this role? If so, frequency and expected travel location(s)
N/A
Candidate Screening / Qualifying Information
Essential Requirements of the role (Experience / Skills / Competencies)
" Have a High School Diploma or equivalent diploma
3+ years related experience or equivalent combination of education and experience.
Desirable attributes of the worker (Experience / Skills / Competencies)
" Ability to read blueprints
" Intermediate math skills
" Intermediate reading skills
" Effective verbal and written communication skills
" Knowledge of applicable certification standards and codes
" Working knowledge of computers sufficient to successfully use company ERP system, Microsoft Windows and
Soft Skills
Attention to detail.
Makes good decisions based upon a mixture of analysis, wisdom, experience, and judgement; most solutions and suggestions turn out to be correct and accurate when judged over time; sought out by others for advice and solutions.
Can quickly find common ground and solve problems for the good of all; can represent own interests and yet be fair to other groups; can solve problems with peers with a minimum of noise; is seen as a team player and is cooperative; easily gains trust an support of peers; encourages collaboration; can be candid with peers.
Uses time effectively and efficiently; values time; concentrates efforts on the more important priorities; gets more done in less them than others; can attend to a broader range of activities.
Has the functional and technical knowledge and skills to do the job at a high level of accomplishment.
Good at figuring out the processes necessary to get things done; knows how to organize activities; understands how to separate and combine tasks into efficient workflow; knows what to measure and how to measure it; can see opportunities for synergy and integration where others can't; can simplify complex process; gets more out of fewer resources.
Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; steadfastly pushes self and others for results.
Sincere dedication to the best interests of the company, its customers and employees.
Concern for quality, accuracy, and safety.
Tools or Software (Required / Preferred)
Microsoft Office, SAP
Education Qualifications (Required / Preferred)
" High school diploma or GED, associate's degree in Industrial Technology or related field preferred
Industry Background or Experience (Required / Preferred)
Have ability to operate Manual machines as well as CNC machines
Offshore Only – Does the candidate require Offshore Medical & Training Certificates Prior to Start?
N/A
Required Accreditations / Qualifications / Certification / Licenses including Drivers License
N/A
Is Medical Fit to Work Required for Role? Is there a specific medical screening required?
N/A
Languages Required & Proficiency Level
English
Target Companies
N/A
Alternative / Target Job Titles
Quality Control Inspector
Off-limits Companies
None
Resume key words
N/A
Mandatory Role-Specific Question & Response 1
NA
Mandatory Role-Specific Question & Response 2
NA
Mandatory Role-Specific Question & Response 3
NA
About the Business & Team
Team Size / Structure and How this Worker Will Fit In
NA
Product Line / Business Segment Information
IET – IP – IVG VAL GTS (DIV_HIER_IET_IP_IVG_VAL_GTS)
Name or Details of the Project/Product/Services Supported
N/A
Logistics of the Role
Contract Duration
12 months
Exact Work Location
3160 West Heartland Drive, Liberty, MO (BLD-(phone number removed))
Location Type (Workshop / Rig / Office / Client Office / etc.)
Workshop
Is Remote Work Offered? If yes, do they have to be in country / in state?
No
Is flexible work arrangement offered?
No
Work Schedule – how many hours per day and per week
Hours per Day – 8 Hours per Week – 40
Rotation Schedule
Yes
Visa Sponsorship Offered (Yes / No)
N/A
Other Offer details (Bonus, Overtime, Standby, Travel etc.)
N/A
Likelihood of Extension
Yes
Likelihood of Temp to Perm Conversion
Yes
Next Steps & Interview
Do you have any planned absences that would delay the review/interview/onboarding process? If yes, is there a delegate that could progress the role in your absence?
N/A
Target Start Date
ASAP
Spotlight Call with Suppliers Required? (Spotlight is Optional only for frequently occurring roles)
This week – TBC
How soon are you looking to interview?
ASAP
Interview Format: In person/Virtual/Assessment. How many rounds?
In person -1 round
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at Privacy Policy – Abacus.